[[!meta title="Endless upgrades"]]
Currently automatic upgrades have the limitation that only some N
number of them can be performed in a row before the system partition
runs out of space and automatic upgrades cannot be done further, but a
full, manual upgrade is needed. Ideally, automatic upgrades should be
possible forever, which will improve the UX and eliminate the
recurring need to manually verify the Tails ISO when doing these
unavoidable full upgrades.
# Different approaches to endless upgrades
While examining these approaches, let's forget about IUKs for a while,
and only consider full automatic upgrades ([[!tails_ticket 7499]]):
## Extract upgrade from ISO
Keeping our current partition layout and filesystems, a full upgrade of
a running system can be done by extracting the required parts from the
new version's .iso. Here we'd need at least 3 times the size of an
1. one for the old, running installation
2. one for the new ISO
3. one for the extracted contents of the new ISO
We would unlink the old squashfs, kernel, initrd etc. then copying in
their place new version's ones, so the new version will run next time
### Disk images instead of ISOs
Note that if we switch to using disk images as the primary way to
install Tails ([[!tails_ticket 8550]], comment 9) we can similarly
extract the needed parts just like above: replace "(ISO|.iso)" with
"disk image" and it still works.
## Streaming decompression
An improved version of the above idea would be to serve "upgrade
packs" using some compression method friendly to streaming
decompression, so the need to download a the full archive (ISO or disk
image above) is avoided, which reduces the amount of temporary disk
space needed from 3 to 2 times the size of an installation when
performing the upgrade.
Grub and syslinux supports booting directly from an ISO so we could
switch to a strategy where Tails USB/SD installation means that we
dump the ISO image into the system partition, and configure the
bootloader to boot from it. If we make the system partition large
enough to store two ISOs (= 2 times the size of an installation, when
comparing o the above methods) we can keep the older, running version
in place while downloading the new one, and then safely switch to the
new one at next boot. Since the old version is kept, there's a
fallback in case the new version doesn't boot. Older versions can be
cleaned up at the next upgrade.
Depending on how Grub/syslinux does the ISOBoot, this may make all
running Tails instances more consistent, i.e. we now do not have the
three cases of what type of medium Tails has booted from: DVD; USB
drive; or SD card -- in all cases we have a ISO9660 filesystem. OTOH,
the magic employed for the ISOBoot may hide too much about underlying
real device, which we still probably will need information about.
Some more details (some perhaps wrong) can be read in comment 16 on
## Apply upgrade in initramfs
By storing the ISO (or disk image) that the upgrade is gonna be
extracted from on a scratch partition, and then apply the upgrade in
initramfs on next boot, we only need 2 times the size of an
installation in total, and can safely download the ISO to the scratch
partition while keeping the system partition read-only.
Ideally, let's also save the files used to authenticate the upgrade on
the scratch partition, and make check the authenticity during
initramfs, before starting the upgrade.
Also, with the scratch partition we will never have to mount it
read-write outside of initramfs, it can be made read-only in a
slightly stronger sense on the block dev level. This is not really a
security feature, but more a foolproof things, but why not?
# Auxilliary ideas
## Read-write system partition while the network is enabled
Currently we keep the system partition read-only as long as the
network is enabled. E.g. we download IUKs into the tmpfs, and when
it's finished we disable the network and only then remount the system
partition read-write to apply the upgrade.
This is problematic for full upgrades, since we cannot assume that
users' systems has over 1 GiB of free RAM available but need to
download it to disk, but cannot use the system partition. In the
"extract upgrade from ISO/Disk image" case we can simply introduce a
scratch partition where the temporary download is stored without loss
of disk usage efficiency (we still need 3 times an installation). But
for the ISOBoot and streaming decompression cases we'd then go from 2
times to 3 times the size of an installation.
It might be worth having a discussion about whether preventing the
network to be used while the system partition is mounted read-write
actually brings us any security. After all, if the system is
compromised while downloading the upgrade, it will still be
compromised when the download is finished and the system partition is
remounted read-write, and it can infect that part then.
Chrome OS keeps the running system partition read-only, has _two_
system partitions, and the update is applied to the non-running one.
This has nice additional properties like allowing one to rollback if
the upgraded system doesn't start properly. More information about
their design and implementation:
* [disk format](https://www.chromium.org/chromium-os/chromiumos-design-docs/disk-format)
* [file system and autoupdate system](https://www.chromium.org/chromium-os/chromiumos-design-docs/filesystem-autoupdate)
* [Android's A/B System Updates](https://source.android.com/devices/tech/ota/ab_updates.html)
## What about IUKs?
If we want to support IUKs at the same time as full upgrades, we need
to allocate even more space to the system partition. Also, we need to
carefully consider the UX part of this.
For instance, we could always give users the choice to do a full or
incremental upgrade unless installing the incremental upgrade will
result in too little disk space remaining for a full upgrade to be
done *next* time -- in this case we only allow full upgrades, to
prevent users from locking themselves in a situation where they cannot
upgrade further. When both options are available, we could give users
the suggestion that they should do a full upgrade if they currently
have a lot of time and/or a fast connection.
## Self-contained verification
An interesting option for Tails installation verification
([[!tails_ticket 7496]]) is to contain all the bits needed to verify
an installation's integrity. For instance, in the ISOBoot case we'd
include the .sig for the ISO on as well as the .iso, so an external
verifier simply can verify the .sig instead of needing an external
known-good .iso to compare with.
The ISOBoot case is the simplest, probably, as the other methods would
require signed manifests of files with the expected hashes (or
similar), which of course is not such a big deal to provide.
The ISOBoot case would still require a manifest of files we extract
from the ISO (bootloader code and configuration), but indeed that
manifest could be in the ISO itself, and thus its authenticity and
integrity would be signed/verified at the same time as the ISO.